Leak Sealing aerosol for Cars 30ml (A/C)

Preventive Verification Test (Facoltative):

1. Identify the charge valve on the low pressure side of the refrigeration or air conditioning system and unscrew the cap.
2. Connect a charging station and make the vacuum of the A/C system for at least 8 minutes.
3. Check the value obtained with a pressure gauge.
4. Switch off the charging station and check that the value obtained is maintained for at least 5 minutes.
5. If it isn't possible to respect this parameter it means that the leak is too big to be repaired.

Instruction for Use:

1. Make the vacuum of the A/C system.
2. Connect the leak charge to the charge valve on the low pressure side of the A/C system, and introduce the sealant. PLEASE NOTE: If you use a exible adapter, let the air iside the hose out, before to connect it to the system.
3. Disconnect from the A/C system.
4. Recharge the system following the manufacturer's instruction.
5. LEt the system work for at least 30 minutes to allow the leak stop to work.