A conversion valve is required for use!
Safety warning!
Do not remove the conversion valve from the bottle after use. Removing the valve causes refrigerant to enter the environment. Leaking refrigerant can cause personal injury.
USER MANUAL
1. Remove the cap from the bottle.
2. Screw the conversion valve onto the bottle.
3. Connect it to the pipe system.
4. Charge until the desired evaporation pressure (based on factory refrigerant) is reached.
5. Repeat the steps when changing the bottle.
IMPORTANT! The bottles are equipped with a single-use shut-off valve at the factory. After the first use, the bottle can be closed with the conversion valve.
QUANTITY OF REFRIGERANT REQUIRED
Dosing should always be done until the evaporation pressure of the original refrigerant is reached. This means refrigerant equal to approximately 33% of the factory charge.
